|
|
|
|
|
Features |
| |
- The inside components of die head are nitrified, tempered and precision-ground.
- This outstanding design of the bottom blowing set facilitates container moulding and creates precision products.
- A specially-designed by-pass circuit permits a very secure mold clamping effect.
- The controlling system all adopted LED display installations which can be displayed the duty-cycle condition. As for the self diagnostic system which being with ease maintenance due to out of order, ease & high efficiency.
- The entire extruder can be adjusted automatically in an upward / downward direction through hydraulic power.
- The unit employs a SSR for high temperature control accuracy to within ±3℃. Various safety devices are provided for maximum safety.
|
|
|
|
|
|
| SPECIFICATIONS |
CM-90I |
Model |
| Material To Be Used |
PE |
| Screw Diameter |
Ø 90 mm |
| L / D Ratio |
1:24 |
| Screw Speed Range ( PE ) / rpm |
17 - 70 |
| Driving Motor PE |
2,100 cc |
| Max. Extrusive Capacity / Per Hour |
100 kgs |
| Heating Zone ( Barrel ) |
3 points |
| Heating Capacity ( Barrel ) |
15.3 kw |
| Die Head |
| Heating Zone ( Die Head ) |
4 points |
| Heating Capacity ( Die Head ) |
24.4 kw |
| Max. Accumulative Capacity |
4.8 kg |
| Double Mold Center Distance |
- |
| Die nozzle Outer Dia. |
Ø 300 mm |
| Parison Thickness Controller |
- |
| Motor Of Parison Thickness Controller |
5 HP |
| Mould Plate |
| Max. Opening Stroke |
1000 mm |
| Min. Close Stroke |
270 mm |
| Mold Size ( Max. ) W x H |
700 x 700 mm |
| Dry Cycle Per Hr |
- |
| Hydraulic System
|
| Hydraulic Pump Motor |
60HP x 6P |
| Hydraulic Oil Pressure |
140 kg / cm2 |
| Mold Clamping Force |
26 ton |
| Oil Tank Capacity |
250 gallon |
| Products |
| Product Weight ( Max. ) |
- |
| Product Dia ( Min. / Max. ) |
Ø 120 - 480 mm |
| Product Capacity ( Min. / Max.) |
10,000 - 30,000 cc |
| Total Power Consumption |
84.5 kw |
| Weight Of Machine |
11 Ton |
| Packing Size ( L x W x H ) |
4.5 x 2.1 x 2.75 ( m ) |
| Machine Meas't ( m3 ) |
- |
| Optional Equipment |
| Air Compressor |
10 HP |
| Chiller |
10 Ton |
| Cooling Tower |
20 RT |
| Auto Loader |
2 HP |
| Hopper Dryer |
100 kg |
|
|
|
|
|
|
|
|
|
2008.10.07~2008.10.10
Ausplas 2008
Melbourne Convention & Exhibition Centre
Booth No. 137C
|
|
|
|
|
|
2008.09.29~2008.10.03
COLOMBIAPLAST (Bogotá, Colombia)
Feria Internacional de Plásticos, Cauchos Y Petroquímica - Feria Internacional de Envases y Empaques
Lugar:Corferias, Pabellón del 11 al 16
|
|
|
|
|
|
Taipei Plas 2008
September 18~22,2008
TWTC Nangang Exhibition Hall
Booth No. K322
|
|
|
|
|
|
Chinaplas 2008
April 17~20,2008
Shanghai New International Expo Centre
Booth No.W5B01
|
|
|
|
|
|
Plastic & Rubber & Packing Ukraine 2008
February 26~29,2008
Exhibition Center KYIVEXPOPLAZA
Booth No.B228
|
|
|
|
|
