|
|
| MODEL |
THREE-LAYER CO-EXTRUSION |
| KS-CFLL55+65T |
| Feature |
| Material To Be Used |
LDPE LLPDPE HDPE EVA PP |
| Max. Film Width |
1500 mm |
| Thickness Of Film |
0.02~0.25 m/m |
| Max. Extrusion Output |
320 kg/hr |
| Extruder |
| Screw Dia. |
55 mm x 2 |
65 mm x 1 |
| Screw L/D |
30:1 |
| Screw / Cylinder Material |
SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT, HARDNESS 75 OR OVER |
| Cylinder Cooling |
1/2 HP x 9 |
| Driving Motor |
40 HP x 2 |
50 HP x 1 |
| Heater Capacity |
45 kw |
| Dies (mm) |
300/350  |
| Temperature Control |
19 points |
| Cooling Equip |
10 HP |
| Take-Up Unit |
| Type |
FIXED TYPE / OSCILLATING TYPE |
| Pinch Roller (mm) |
165 x 1600 L |
| Take-Up Motor |
2 HP |
| Take-Up Speed (m/min) |
6-60 |
| Sub-Pinch Roller (mm) |
140 x 1600 L |
| Guide Motor |
50 kg/cm |
| Winding Unit |
| FW Type |
ONE STATION SURFACE WINDER WITH AUTOMATIC BOBBIN CHANGE |
| Effective Width |
1500 mm |
| Dia. Of Film Wound-Up Roll |
800 mm |
| Winder Motor |
2 HP |
| Dimension (L x W x H) (M) |
8.0 x 5.3 x 9.0 |
| Optional Device |
GRAVIMETRIC DOSING UNIT, THICKNESS MEASUREMENT, WIDTH CONTROLLER (IBC) INTERNAL BUBBLE COOLING COMPUTER CONTROL SYSTEM, LINE SPEED SYNCHRONIZED WITH COMPUTER CONTROL, AUTOMATIC HOPPER LOADER, FILM SURFACE TREATER, PRESSURE GAUGE, ROTARY DIE, TWO STATIONS SURFACE WINDER, OSCILLATING TAKE UP UNIT, CHILLER, HEAT SLITTING DEVICE, EDGE POSITION CONTROL, ELECTRONIC TENSION CONTROL, PIB PUMP SYSTEM, CRANE FOR DIE, AIR SHAFT. |
|
|
|
|
|
|
VIDEO
