| MODEL |
KS-MF75 |
| Feature |
| Material To Be Used |
P.E & P.P |
| Dia. Of Filament |
0.15 ~ 1 m/m MONOFILAMENT |
| Extrusion Out Put |
125 kg/hr |
| Extruder |
| Screw Dia. |
75 m/m  |
| Screw L/D |
30:1 |
| Screw Material |
SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT |
| Cylinder Material |
SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT |
| Cylinder Cooling |
1/2 HP x 4 |
| Driving Motor |
50 HP |
| Heater Capacity |
35 kw |
| Die |
| Nozzle (Holes) |
205 |
| Control Panel |
| Type |
INDEPENDENCE TYPE SWITCH BOARD (BOX) |
| Auto-Therm Control |
7 Points |
| Cooling Device |
| Water Cooling Tank |
770W x 1500L x 600H |
| Take-Off Unit A |
|
| Driving Motor |
7 1/2 HP |
| Take-Off Speed |
10 ~ 25 m/min |
| Take-Off Roller (m/m) |
270 x 600L x 7PCS |
Penumatic Roller (m/m) |
140 x 560L x 1PC |
| Hot Oven Stretching Device |
| Length (m/m) |
600W x 3000L |
| Blower |
2 HP BLOWER x 2 |
| Heater Capacity |
22 kw |
| Auto-Therm Control |
1 SET |
| Take-Off Unit B |
| Driving Motor |
10 HP |
| Take-Off Speed |
40 ~ 160 m/min |
| Take-Off Roller (m/m) |
270 x 600L x 7PCS |
| Penumatic Roller (m/m) |
140 x 560L x 1PC |
| Hot Air Annealling Device |
| Length (m/m) |
600W x 4500L |
| Blower |
2 HP BLOWR x 2 |
| Heater Capacity |
18 kw |
| Auto-Therm Control |
2 SETS |
| Take-Off Unit C |
| Driving Motor |
7 1/2 HP |
| Take-Off Speed |
40 ~ 160 m/min |
| Take-Off Roller (m/m) |
270 x 600L x 5PCS |
| Penumatic Roller (m/min) |
140 x 560L x 1PC |
| Winding Unit |
| Type |
MSW & MPW |
| NO. Of Spindles |
210 (105 x 2) |
| Winding Motor |
3 kg/cm x 210 |
| Traverse Motor |
2 HP HYDRAULIC POWER UNIT x 1 |
| Waste Roll Drive |
30 kg/cm x 1 |
| Shipping Data |
| Dimension (L x W x H) (M) |
32.0 x 2.5 x 2.5 |
| Total Container |
40 x 2 |
| Optional Device |
NON-STOP SCREEN CHANGER, PRESSURE GAUGE, GEAR PUMP, LINE SPEED SYCHRONIZED DEVICE, WASTE COLLECTOR, DRYER, CHILLER. |
VIDEO
