| MODEL |
LD/LLDPE SUPER HIGH
SPEED INFLATION
MACHINE SINGLE HEAD TYPE
LD/LLDPE |
LD/LLDPE HIGH SPEED
INFLATION MACHINE SINGLE
HEAD TYPE LD/LLDPE |
| KS-FLL100A |
KS-FLL100 |
| Feature |
| Material To Be Used |
LOW DENSITY POLYETHYLENE RESIN |
| Max. Film Width |
3000 m/m |
2700 m/m |
| Thickness Of Thickness |
0.01~0.25 m/m |
| Max. Extrusion Output |
350 kg/hr |
300 kg/hr |
| Extruder |
| Screw Dia. |
100 m/m |
| Screw L/D |
30:1 |
| Screw Material |
SACM-645 STEEL WITH HARD WITH NITROGEN TREATMENT |
| Cylinder Material |
SACM-645 STEEL WITH HARD WITH NITROGEN TREATMENT |
| Cylinder Cooling |
1/2 HP x 4 |
| Driving Motor + Inverter Controller |
175 HP |
125 HP |
| Heater Capacity |
75 KW |
70 KW |
| Dies (m/m) |
750  |
650 |
| Control Panel |
| Type |
INDEPENDENCE TYPE SWITCH BOARD (BOX) |
| Temperature Control |
9 POINTS |
| Cooling Equip |
| Type |
AIR COOLING SYSTEM |
| Air Blower + Inverter Controller |
10 HP |
| Take-Up Unit |
| Type |
FIXED TYPE |
| Pinch Rolling (m/m) |
270 x 3100 L |
270 x 2800 L |
| Take-Up Motor + Inverter Controller |
5 HP |
| Take-Up Speed (m/min) |
5~50 |
| Steady Plate |
1 UNIT |
| Sub-Pinch Roller (m/m) |
165 x 3100 L |
165 x 2800 L |
| Guide Motor |
50 kg/cm |
| Winding Unit |
| Type |
ONE STATION TYPE SURFACE WINDER |
| Effective Width |
3000 m/m |
2700 m/m |
| Dia. Of Film Wound-Up Roll |
1000 m/m |
| Winding Motor + Inverter Controller |
5 HP |
| Shipping Data (Approx:) |
| Measurement (M 3) |
60 |
| Weight (KG) |
10000 |
9500 |
| Dimension (L x W x H) (M) |
10 x 4.5 x 11 |
9.5 x 4.5 x 10 |
| Optional Device |
Automatic Hopper Loader, Film Surface Treater, Pressure Gauge, Two-Station Surface Winder, Chiller, Rotary Die, Oscillating Take-Up Unit, EPC Device, Electronic Tension Control, Auto Unloading Device, Heat Slitting Device, Gravimetric Dosing Unit, Thickness Measurement, Width Controller, Internal Bu Bble Cooling System (IBC). |
