|
|
| MODEL |
THREE-LAYER CO-EXTRUSION FOR JUMBO BAG
(INDUSTRIAL AND AGRICUL TURAL USE) |
| KS-CFLL100+120T |
KS-CFLL100+135T |
| Feature |
| Material To Be Used |
LDPE LLPDPE HDPE EVA PP |
| Max. Film Width |
5000 mm |
6000 mm |
| Thickness Of Film |
0.02~0.25 m/m |
| Max. Extrusion Output |
1100 kg/hr |
1200 kg/hr |
| Extruder |
| Screw Dia. |
100 mm x 2 120 mm x 1 |
100 mm x 2 135 mm x 1 |
| Screw L/D |
30:1 |
| Screw / Cylinder Material |
SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT, HARDNESS 75 OR OVER |
| Cylinder Cooling |
1/2 HP x 14 |
1/2 HP x 16 |
| Driving Motor |
150 HP x 2 200 HP x 1 |
150 HP x 2 250 HP x 1 |
| Heater Capacity |
250 kw |
300 kw |
| Dies (mm) |
1200  |
1350 |
| Temperature Control |
27 points |
30 points |
| Cooling Equip |
20 HP |
25 HP |
| Take-Up Unit |
| Type |
FIXED TYPE / OSCILLATING TYPE |
| Pinch Roller (mm) |
270 x 3000L |
270 x 3500L |
| Take-Up Motor |
5 HP |
7 1/2 HP |
| Take-Up Speed (m/min) |
6 ~ 60 |
| Sub-Pinch Roller (mm) |
165 x 3000L |
165 x 3500L |
| Guide Motor |
75 kg/cm |
| Winding Unit |
| FW Type |
ONE STATION SURFACE WINDER WITH AUTOMATIC BOBBIN CHANGE |
| Effective Width |
2800 mm |
3300 mm |
| Dia. Of Film Wound-Up Roll |
800 mm |
| Winder Motor |
5 HP |
7 1/2 HP |
| Dimension (L x W x H) (M) |
14 x 12 x 16 |
16 x 14 x 20 |
| Optional Device |
GRAVIMETRIC DOSING UNIT, THICKNESS MEASUREMENT, WIDTH CONTROLLER (IBC) INTERNAL BUBBLE COOLING COMPUTER CONTROL SYSTEM, LINE SPEED SYNCHRONIZED WITH COMPUTER CONTROL, AUTOMATIC HOPPER LOADER, FILM SURFACE TREATER, PRESSURE GAUGE, ROTARY DIE, TWO STATIONS SURFACE WINDER, OSCILLATING TAKE UP UNIT, CHILLER, HEAT SLITTING DEVICE, EDGE POSITION CONTROL, ELECTRONIC TENSION CONTROL, PIB PUMP SYSTEM, CRANE FOR DIE, AIR SHAFT. |
|
|
|
|
|
|
